Upgrading to version 7.0, How to avoid most issue's when upgradingInstalling version 7.0
If you upgrading to 7.0 from version 6.0, then i would
strongly recommend that you uninstall 6.0 or any other previous version (this includes AV's from other vendors!)....... completely only keeping the activationdata of the possiblities you have to save data when you uninstall 6.0. If you previously have had other anti-viruses installed then I would recommend you have a look at this
sticky, Norton removal steps are very important even after you have removed normally via add/remove programs!
If you have problems uninstalling Kaspersky, then you have removaltools you can use to remove remnants, for 6.0:
1. Download
KisKav6Remove.zip 2. Unpack the downloaded archive KisKav6Remove.zip to a folder, boot into safemode and run the file KisKav6Remove.exe. When the utility finishes its work, restart the computer in the normal mode.
Only works if installed in the default c:\ location with windows!3. Now boot into normalmode.
For Kaspersky 5.0 you can download the tool
here, for 4.0/4.5
here. Both these tools also is more effective in safemode.
Safemode:
Windows 98/Me
Restart the computer.
Just after the POST diagnostics and memory count, start pressing the F8 key
On the Startup Menu, choose Safe Mode
or you may use the System Configuration Utility Method.
While in Normal mode, Close all programs.
Click Start, Run and type MSCONFIG in the box and click OK
In the System Configuration Utility, on the General Tab, click the Advanced Button
In the Advanced Troubleshooting Settings dialog box, check Enable Startup Menu. Click OK. Click OK again when the System Configuration Utility reappears.
You will be prompted to restart the computer. Click Yes. The computer will restart in Safe mode.
When you are finished with troubleshooting in Safe mode, open MSCONFIG again and uncheck "Enable Start-up Menu." under the Advanced Menu, then click OK and restart your computer
Windows 2000
If the computer is running, shut down Windows, and then turn off the power
Wait 30 seconds, and then turn the computer on.
When you see the black-and-white Starting Windows bar at the bottom of the screen, start tapping the F8 key. The Windows 2000 Advanced Options Menu appears.
Ensure that the Safe mode option is selected. In most cases, it is the first item in the list and is selected by default.
Press Enter. The computer then begins to start in Safe mode.
When you are finished with all troubleshooting, close all programs and restart the computer as you normally would.
Windows XP
If Windows XP is the only operating system installed on your computer, booting into Safe Mode with these instructions.
If the computer is running, shut down Windows, and then turn off the power
Wait 30 seconds, and then turn the computer on.
Start tapping the F8 key. The Windows Advanced Options Menu appears. If you begin tapping the F8 key too soon, some computers display a "keyboard error" message. To resolve this, restart the computer and try again.
Ensure that the Safe mode option is selected.
Press Enter. The computer then begins to start in Safe mode.
When you are finished with all troubleshooting, close all programs and restart the computer as you normally would.
To use the System Configuration Utility method
Close all open programs.
Click Start, Run and type MSCONFIG in the box and click OK
The System Configuration Utility appears, On the BOOT.INI tab, Check the "/SAFEBOOT" option, and then click OK and Restart your computer when prompted.
The computer restarts in Safe mode.
Perform the troubleshooting steps for which you are using Safe Mode.
When you are finished with troubleshooting in Safe mode, open MSCONFIG again, on the BOOT.INI tab, uncheck "/SAFEBOOT" and click OK to restart your computer
进入卡巴斯基爱好者论坛，与众多卡饭共同分享、交流
