乌鲁木齐市MedAccred _AC8102热处理基准审核标准【33】
16.3.3 (EC) Step Two Age/PPT/Second Temper – Time
|
REQUIREMENT |
SHOP PAPER REQUIREMENT |
ACTUAL |
|
|
Atmosphere |
(EC) |
(EC) |
(EC) |
|
Time and Tolerance |
(EC) |
(EC) |
(EC) |
|
Time loaded into furnace |
|||
|
Time start of soak |
(EC) |
||
|
Time end of soak |
(EC) |
||
|
Media for Cooling |
(EC) |
(EC) |
(EC) |
|
Cooling Rate (Excluding Quench) |
(EC) |
(EC) |
(EC) |
16.4 Testing for the abbreviated Job #3 SECTION NA
16.4.1 (EC) Testing requirements by Specification, P/O or Drawing
16.4.1.1 (EC) Shop paper testing requirements
16.4.1.2 (EC) Actual testing performed:
16.5 Job Acceptance
16.5.1 Is the operation signed off or data recorded only after completion? YES/NO
16.5.2 Did the treatment of hardware conform to customer’s specified requirements? YES/NO
17. COMPLIANCE AUDIT OF ABBREVIATED IN-PROCESS HEAT TREATING JOB SECTION NA
17.1 Job #4 Identity
17.1.1 Purchase order number:
17.1.2 Customer:
17.1.3 Job number, Part number:
17.1.4 Part description:
17.1.5 Part size:
17.1.6 Maximum part thickness:
17.1.7 Number of parts:
17.1.8 (EC) Material alloy, Material specification (if available):
17.1.9 (EC) Heat Treating specification:
17.1.10 (EC) Heat treat and other process and test requirements specified by customer specification (i.e. fixed process approval):
17.1.11 (EC) Pre-heat treatment requirements (cleaning, plating, etc.)
17.1.12 (EC) Pre-heat treatment actually performed:
17.2 Thermal Treatment Step One SECTION NA
17.2.1 Step One
17.2.1.1 Furnace used:
17.2.1.2 Date part(s) processed:
17.2.2 Does the furnace possess the control and recording instrumentation required by the governing specification for this heat treatment? YES/NO
17.2.3 (EC) Step One – Temperature
|
REQUIREMEN T |
SHOP PAPER REQUIREMENT |
SET TEMPERATUR E |
ACTUAL TEMPERATURES |
||
|
Temperature |
(EC) |
(EC) |
(EC) |
||
|
Check if used |
|||||
|
Control |
(EC) |
||||
|
Recorder |
(EC) |
||||
|
High/Low - Type A or C Instrumentation |
(EC) |
||||
|
Load Thermocouples |
(EC) |